Review of Thermaltake TG-30 Premium CPU/GPU Heatsink Thermal Compound | 4g | CL-O023-GROSGM-AThis is trying to aid the user to apply a more even distribution of thermal compound when thermal compound must be replaced either to deterioration of the old compound or when the heat sink was separated from the CPU. More even and consistent distribution is achieved by having a thinner paste than does not have to be worked over the surface and also by reducing extremely small air bubbles that may help lead to hot spots.Comparison of CPU temperatures before and after applying this product really are not valid because what is happening is that the user is comparing and older and more broken down product to a fresh application. Think of it as comparing the taste of a beer that has been left open for several hours to one fresh out of a bottle or tap. If properly and evenly applied new thermal compound will always perform better than old, dried out.Different people swear that various application methods are superior to others but much of this depends upon the user. This adds to the mix of differing application methods.The video basically shows the application of this compound better than I can describe. There will be some wastage of product over the honeycomb stencil but there frequently is excessive wastage with other products due to applying too much and/or too thick.I have a good opinion of the quality of Thermaltake products so I am not concerned that this thermal compound will degrade too quickly over time. I probably would go with the TG-50 over TG-30 if or when I needed to purchase additional thermal compound due to a higher thermal conductivity.